Comments on: Quick Temperature Test of the Raspberry Pi 4 8GB https://www.geeks3d.com/20200807/quick-temperature-test-of-the-raspberry-pi-4-8gb/ Graphics Cards and GPUs News, Graphics Programming, Home of FurMark Mon, 17 May 2021 14:59:04 +0000 hourly 1 https://wordpress.org/?v=6.7.1 By: JeGX https://www.geeks3d.com/20200807/quick-temperature-test-of-the-raspberry-pi-4-8gb/#comment-86782 Mon, 17 May 2021 14:59:04 +0000 https://www.geeks3d.com/?p=10062#comment-86782 In reply to Terry.

Can you post a picture?

]]> By: Terry https://www.geeks3d.com/20200807/quick-temperature-test-of-the-raspberry-pi-4-8gb/#comment-86781 Sat, 15 May 2021 15:54:35 +0000 https://www.geeks3d.com/?p=10062#comment-86781 I use armoured passive heat sink.
Idle temp 52c.
Thrashing the cpu all cores 70c.
Then added a Corsair fan from pc. Placed the fan on 4 legs above the pi 4.
Used a PSu with diff… voltage settings to change speed.
The fan on low speed … all cores full stress test. Max temp 39c idle 28c.

Works brilliantly. Whisper quiet.

]]> By: JeGX https://www.geeks3d.com/20200807/quick-temperature-test-of-the-raspberry-pi-4-8gb/#comment-86704 Wed, 16 Dec 2020 06:28:32 +0000 https://www.geeks3d.com/?p=10062#comment-86704 In reply to andrew u frank.

The version of GL-Z for the Raspberry Pi has been compiled for Raspbian Buster / Raspberry Pi OS in 32-bit. So I’m not surprised it does not work on your ubuntu 64-bit.

]]> By: andrew u frank https://www.geeks3d.com/20200807/quick-temperature-test-of-the-raspberry-pi-4-8gb/#comment-86703 Tue, 15 Dec 2020 18:33:42 +0000 https://www.geeks3d.com/?p=10062#comment-86703 What software GL_Z were you using with the Raspi 4? I downloaded from your website and got for the raspi “gl_z_temp_raspi/GLZ_0.5.0_rpi_gl2” but cannot run it on a Raspi 4, running with 64bit ubuntu (exactly the ubuntu_MATE distribution). I would like to see how effective the JOY-IT armor case is.
thank you!

]]>